GE6163 Physics and Chemistry Laboratory - I Syllabus-Semester I-AERO-BE-Anna University

ge6163-physics-and-chemistry-laboratory-i-syllabus-semester-i-aero-be-anna-universityGE6163 Physics and Chemistry Laboratory - I Syllabus-Semester I-AERO-BE-Anna University AERO SEM I Syllabus, AERO SYLLABUS

 

 

 

GE6163                              PHYSICS AND CHEMISTRY LABORATORY – I                       L  T  P  C

0 0 2   1

 

 

OBJECTIVES:

 

PHYSICS LABORATORY – I

 

• To introduce different experiments to test basic understanding of physics concepts applied in optics, thermal physics and properties of matter.

 

LIST OF EXPERIMENTS

(Any FIVE Experiments)

1. 1. (a) Determination of Wavelength, and particle size using Laser

(b)  Determination of acceptance angle in an optical fiber.

2. Determination  of   velocity   of   sound   and   compressibility   of   liquid   –   Ultrasonic interferometer.
3. Determination of wavelength of mercury spectrum – spectrometer grating
4. Determination of thermal conductivity of a bad conductor – Lee’s Disc method.
5. Determination of Young’s modulus by Non uniform bending method
6. 6. Determination of specific resistance of a given coil of wire – Carey Foster’s Bridge

 

OUTCOMES:

• The hands on exercises undergone by the students will help them to apply physics principles of optics and thermal physics to evaluate engineering properties of materials.

 

LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:

1. Diode laser, lycopodium powder, glass plate, optical fiber.
2. Ultrasonic interferometer
3. Spectrometer, mercury lamp, grating
4. Lee’s Disc experimental set up
5. Traveling microscope, meter scale, knife edge, weights
6. Carey foster’s bridge set up

(vernier Caliper, Screw gauge, reading lens are required for most of the experiments)

 

 

OBJECTIVES:

 

CHEMISTRY LABORATORY- I

 

• To make the student to acquire practical skills in the determination of water quality parameters through volumetric and instrumental analysis.
• To acquaint the students with the determination of molecular weight of a polymer by vacometry.

 

LIST OF EXPERIMENTS

(Any FIVE Experiments)

1      Determination of DO content of water sample by Winkler’s method.

2      Determination of chloride content of water sample by argentometric method.

3      Determination of strength of given hydrochloric acid using pH meter.

4      Determination of strength of acids in a mixture using conductivity meter.

5       Estimation of iron content of the water sample using spectrophotometer. (1,10- phenanthroline / thiocyanate method).

6      Determination of molecular weight of polyvinylalcohol using Ostwald viscometer.

7      Conductometric titration of strong acid vs strong base.

 

 

OUTCOMES:

 

TOTAL: 30 PERIODS

 

• The students will be outfitted with hands-on knowledge in the quantitative chemical analysis of water quality related parameters.

 

REFERENCES:

1. Daniel R. Palleros, “Experimental organic chemistry” John Wiley & Sons, Inc., New York 2001.
2. Furniss B.S. Hannaford A.J, Smith P.W.G and Tatchel A.R., “Vogel’s Textbook of practical organic chemistry”, LBS Singapore 1994.
3. Jeffery G.H., Bassett J., Mendham  J.and Denny vogel’s R.C, “Text book of quantitative analysis chemical analysis”, ELBS 5th Edn. Longman, Singapore publishers, Singapore, 1996.
4. Kolthoff I.M.,  Sandell E.B. et al. “Quantitative chemical analysis”, Mcmillan, Madras 1980.

 

LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:

 

1.	Iodine flask	-          30 Nos
2.	pH meter	-            5 Nos
3.	Conductivity meter	-            5 Nos
4.	Spectrophotometer	-            5 Nos
5.	Ostwald Viscometer	-          10 Nos

 

Common Apparatus : Pipette, Burette, conical flask, percelain tile, dropper (each 30 Nos.)

 

GE6162 Engineering Practices Laboratory Syllabus-Semester I-AERO-BE-Anna University

ge6162-engineering-practices-laboratory-syllabus-semester-i-aero-be-anna-universityGE6162 Engineering Practices Laboratory Syllabus-Semester I-AERO-BE-Anna University AERO SEM I Syllabus, AERO SYLLABUS

 

GE6162                              ENGINEERING PRACTICES LABORATORY                              L T  P  C

0 0  3 2

OBJECTIVES:

• To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.

 

GROUP A (CIVIL & MECHANICAL)

 

I          CIVIL ENGINEERING PRACTICE                                                                                       9

 

Buildings:

 

(a) Study of plumbing and carpentry components of residential and industrial buildings. Safety aspects.

 

Plumbing Works:

(a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions, reducers, elbows in household fittings.

(b) Study of pipe connections requirements for pumps and turbines.

(c) Preparation of plumbing line sketches for water supply and sewage works. (d) Hands-on-exercise:

 

Basic pipe connections – Mixed pipe material connection – Pipe connections with different joining components.

(e) Demonstration of plumbing requirements of high-rise buildings.

 

Carpentry using Power Tools only:

(a) Study of the joints in roofs, doors, windows and furniture. (b) Hands-on-exercise:

Wood work, joints by sawing, planing and cutting.

 

II         MECHANICAL ENGINEERING PRACTICE                                                                       13

 

Welding:

(a) Preparation of arc welding of butt joints, lap joints and tee joints. (b) Gas welding practice

Basic Machining:

(a) Simple Turning and Taper turning

(b) Drilling Practice

 

Sheet Metal Work:

(a) Forming & Bending:

(b) Model making – Trays, funnels, etc. (c) Different type of joints.

 

Machine assembly practice:

(a) Study of centrifugal pump

(b) Study of air conditioner

Demonstration on:

(a)  Smithy operations, upsetting, swaging, setting down and bending. Example – Exercise – Production of hexagonal headed bolt.

(b)  Foundry operations like mould preparation for gear and step cone pulley. (c)  Fitting – Exercises – Preparation of square fitting and vee – fitting models.

 

GROUP B (ELECTRICAL & ELECTRONICS)

 

III       ELECTRICAL ENGINEERING PRACTICE                                                                        10

1. Residential house wiring using switches, fuse, indicator, lamp and energy meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power factor in RLC

circuit.

5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.

 

IV	ELECTRONICS ENGINEERING PRACTICE	13
	1. Study of Electronic components and equipments – Resistor, colour coding of AC signal parameter (peak-peak, rms period, frequency) using CR. 2. Study of logic gates AND, OR, EOR and NOT. 3. Generation of Clock Signal.	measurement

4. Soldering practice –  Components  Devices  and  Circuits  –  Using  general      purpose

PCB.

5. Measurement of ripple factor of HWR and FWR.

 

 

OUTCOMES:

 

TOTAL: 45 PERIODS

 

• ability to fabricate carpentry components and pipe connections including plumbing works.
• ability to use welding equipments to join the structures.
• ability to fabricate electrical and electronics circuits.

 

REFERENCES:

1. Jeyachandran   K.,   Natarajan   S.   &   Balasubramanian   S.,   “A   Primer   on   Engineering

Practices Laboratory”, Anuradha Publications, 2007.

2. Jeyapoovan T., Saravanapandian M. & Pranitha S., “Engineering Practices Lab   Manual”, Vikas Puplishing House Pvt.Ltd, 2006.
3. Bawa H.S., “Workshop Practice”, Tata McGraw – Hill Publishing Company Limited, 2007.
4. Rajendra Prasad A. & Sarma P.M.M.S., “Workshop Practice”, Sree Sai  Publication,  2002.
5. Kannaiah P. & Narayana K.L., “Manual on Workshop Practice”, Scitech Publications, 1999.

 

LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS: CIVIL

1. Assorted components for plumbing consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions, elbows, plugs and

other fittings.                                                                                 15 Sets.

2. Carpentry vice (fitted to work bench) 15 Nos.
3. Standard woodworking tools 15 Sets.
4. Models of industrial trusses, door joints, furniture joints 5 each
5. Power Tools: (a) Rotary Hammer 2 Nos

(b) Demolition Hammer                                                                2 Nos (c) Circular Saw                                                                           2 Nos (d) Planer                                                                                     2 Nos (e) Hand Drilling Machine                                                            2 Nos (f) Jigsaw                                                                                     2 Nos

 

MECHANICAL

 

1. Arc welding transformer with cables and holders 5 Nos.
2. Welding booth with exhaust facility 5 Nos.
3. Welding accessories like welding shield, chipping hammer,

wire brush, etc.                                                                             5 Sets.

4. Oxygen and acetylene gas cylinders, blow pipe and other

welding outfit.                                                                                2 Nos.

 

5. Centre lathe 2 Nos.
6. Hearth furnace, anvil and smithy tools 2 Sets.
7. Moulding table, foundry tools 2 Sets.
8. Power Tool: Angle Grinder 2 Nos
9. Study-purpose items: centrifugal pump, air-conditioner One each.

 

ELECTRICAL

1. Assorted electrical components for house wiring 15 Sets
2. Electrical measuring instruments 10 Sets
3. Study purpose items: Iron box, fan and regulator, emergency lamp 1 each
4. Megger (250V/500V) 1 No.
5. Power Tools: (a) Range Finder 2 Nos

(b) Digital Live-wire detector                                   2 Nos

 

ELECTRONICS

1. Soldering guns 10 Nos.
2. Assorted electronic components for making circuits 50 Nos.
3. Small PCBs 10 Nos.
4. Multimeters 10 Nos.
5. Study purpose items: Telephone, FM radio, low-voltage power supply

 

GE6161 Computer Practices Laboratory Syllabus-Semester I-AERO-BE-Anna University

ge6161-computer-practices-laboratory-syllabus-semester-i-aero-be-anna-universityGE6161 Computer Practices Laboratory Syllabus-Semester I-AERO-BE-Anna University AERO SEM I Syllabus, AERO SYLLABUS

 

 

GE6161	COMPUTER PRACTICES LABORATORY	L	T  P	C
		0	0  3	2

OBJECTIVES:

The student should be made to:

• Be familiar with the use of Office software.
• Be exposed to presentation and visualization tools.
• Be exposed to problem solving techniques and flow charts.
• Be familiar with programming in C.
• Learn to use Arrays, strings, functions, structures and unions.

 

LIST OF EXPERIMENTS:

1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization – graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions – Includes Parameter Passing
9. Program using Recursive Function and conversion from given program to flow chart.
10. Program using structures and unions.

 

 

OUTCOMES:

At the end of the course, the student should be able to:

• Apply good programming design methods for program development.
• Design and implement C programs for simple applications.
• Develop recursive programs.

 

TOTAL : 45 PERIODS

 

 

LIST OF EQUIPMENTS FOR A BATCH OF 30 STUDENTS:

Standalone desktops with C compiler           30 Nos.

 

(or)

Server with C  compiler  supporting 30 terminals or more.

 

GE6152 Engineering Graphics Syllabus-Semester I-AERO-BE-Anna University

ge6152-engineering-graphics-syllabus-semester-i-aero-be-anna-universityGE6152 Engineering Graphics Syllabus-Semester I-AERO-BE-Anna University AERO SEM I Syllabus, AERO SYLLABUS

 

 

 

 

GE6152                                           ENGINEERING GRAPHICS                                            L  T   P  C

2  0   3  4

OBJECTIVES:

• To develop in students, graphic skills for communication of concepts, ideas and design of

Engineering products.

• T o expose them to existing national standards related to technical drawings.

 

CONCEPTS AND CONVENTIONS (Not for Examination)                                                                  1

Importance   of   graphics   in   engineering   applications   –   Use   of   drafting   instruments   –  BIS conventions and specifications – Size, layout and folding of drawing sheets – Lettering and dimensioning.

 

UNIT I             PLANE CURVES AND FREE HAND SKETCHING                                                   5+9

Basic Geometrical constructions, Curves used in engineering practices:  Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of  square and circle  – Drawing of tangents and normal to  the above  curves,  Scales: Construction of Diagonal and Vernier scales.

Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three

Dimensional objects – Layout of views- Free hand  sketching of multiple views from pictorial views of objects

 

UNIT II            PROJECTION OF POINTS, LINES AND PLANE SURFACES                                5+9

Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes  - Determination of true lengths and t r ue inclinations by rotating line method  and traces Projection of planes  (polygonal and circular surf aces ) inclined to both the principal planes by rotating object method.

 

UNIT III           PROJECTION OF SOLIDS                                                                                         5+9

Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.

 

UNIT IV          PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF

SURFACES                                                                                                                 5+9

Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes

 

UNIT V           ISOMETRIC AND PERSPECTIVE PROJECTIONS                                                   6+9

Principles  of  isometric projection  –  isometric  scale  –Isometric projections of   simple  solids and truncated solids - Prisms, pyramids, cylinders, cones-   combination of two solid objects in simple vertical positions and  miscellaneous   problems. Perspective  projection  of  simple  solids-Prisms, pyramids and   cylinders by visual ray method .

 

COMPUTER AIDED DRAFTING (Demonstration Only)                                                                     3

Introduction to drafting packages and demonstration of their use.

 

 

OUTCOMES:

On Completion of the course the student will be able to

 

TOTAL: 75 PERIODS

 

• perform free hand sketching of basic geometrical constructions and multiple views of objects.
• do orthographic projection of lines and plane surfaces.
• draw projections and solids and development of surfaces.
• prepare isometric and perspective sections of simple solids.
• demonstrate computer aided drafting.

 

TEXT BOOK:

1. Bhatt  N.D.  and  Panchal  V.M.,  “Engineering  Drawing”,  Charotar  Publishing  House,  50th

Edition, 2010.

 

REFERENCES:

1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore,

2007.

2. Luzzader, Warren.J.  and  Duff,John  M.,  “Fundamentals  of  Engineering  Drawing  with  an introduction to Interactive Computer Graphics  for Design and Production, Eastern Economy Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K.  and  Prabhu    Raja V., “Engineering  Graphics”,  New Age  International  (P) Limited, 2008.
5. Natrajan K.V.,  “A    text    book    of    Engineering    Graphics”,    Dhanalakshmi  Publishers,

Chennai, 2009.

6. Basant  Agarwal  and  Agarwal  C.M.,  “Engineering  Drawing”,  Tata  McGraw  Hill  Publishing

Company Limited, New Delhi, 2008.

 

Publication of Bureau of Indian Standards:

1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.

 

Special points applicable to University Examinations on Engineering  Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer  paper  shall  consist  of  drawing  sheets  of  A3  size  only.  The students will be permitted to use appropriate scale to fit solution within A3  size.
4. The examination will be conducted in appropriate sessions on the same day

 

GE6152 Engineering Graphics Syllabus-Semester I-AERO-BE-Anna University

GE6152 Engineering Graphics Syllabus-Semester I-AERO-BE-Anna University AERO SEM I Syllabus, AERO SYLLABUS




GE6152                                           ENGINEERING GRAPHICS                                            L  T   P  C
2  0   3  4
OBJECTIVES:

• To develop in students, graphic skills for communication of concepts, ideas and design of

Engineering products.

• T o expose them to existing national standards related to technical drawings.

CONCEPTS AND CONVENTIONS (Not for Examination)                                                                  1
Importance   of   graphics   in   engineering   applications   –   Use   of   drafting   instruments   –  BIS conventions and specifications – Size, layout and folding of drawing sheets – Lettering and dimensioning.

UNIT I             PLANE CURVES AND FREE HAND SKETCHING                                                   5+9
Basic Geometrical constructions, Curves used in engineering practices:  Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of  square and circle  – Drawing of tangents and normal to  the above  curves,  Scales: Construction of Diagonal and Vernier scales.
Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three
Dimensional objects – Layout of views- Free hand  sketching of multiple views from pictorial views of objects

UNIT II            PROJECTION OF POINTS, LINES AND PLANE SURFACES                                5+9
Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes  - Determination of true lengths and t r ue inclinations by rotating line method  and traces Projection of planes  (polygonal and circular surf aces ) inclined to both the principal planes by rotating object method.

UNIT III           PROJECTION OF SOLIDS                                                                                         5+9
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.

UNIT IV          PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF
SURFACES                                                                                                                 5+9
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes

UNIT V           ISOMETRIC AND PERSPECTIVE PROJECTIONS                                                   6+9
Principles  of  isometric projection  –  isometric  scale  –Isometric projections of   simple  solids and truncated solids - Prisms, pyramids, cylinders, cones-   combination of two solid objects in simple vertical positions and  miscellaneous   problems. Perspective  projection  of  simple  solids-Prisms, pyramids and   cylinders by visual ray method .

COMPUTER AIDED DRAFTING (Demonstration Only)                                                                     3
Introduction to drafting packages and demonstration of their use.


OUTCOMES:
On Completion of the course the student will be able to

TOTAL: 75 PERIODS

• perform free hand sketching of basic geometrical constructions and multiple views of objects.
• do orthographic projection of lines and plane surfaces.
• draw projections and solids and development of surfaces.
• prepare isometric and perspective sections of simple solids.
• demonstrate computer aided drafting.

TEXT BOOK:

1. Bhatt  N.D.  and  Panchal  V.M.,  “Engineering  Drawing”,  Charotar  Publishing  House,  50th

Edition, 2010.

REFERENCES:

1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore,

2007.

2. Luzzader, Warren.J.  and  Duff,John  M.,  “Fundamentals  of  Engineering  Drawing  with  an introduction to Interactive Computer Graphics  for Design and Production, Eastern Economy Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K.  and  Prabhu    Raja V., “Engineering  Graphics”,  New Age  International  (P) Limited, 2008.
5. Natrajan K.V.,  “A    text    book    of    Engineering    Graphics”,    Dhanalakshmi  Publishers,

Chennai, 2009.

6. Basant  Agarwal  and  Agarwal  C.M.,  “Engineering  Drawing”,  Tata  McGraw  Hill  Publishing

Company Limited, New Delhi, 2008.

Publication of Bureau of Indian Standards:

1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.

Special points applicable to University Examinations on Engineering  Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer  paper  shall  consist  of  drawing  sheets  of  A3  size  only.  The students will be permitted to use appropriate scale to fit solution within A3  size.
4. The examination will be conducted in appropriate sessions on the same day