August 2016 | ANNA UNIVERSITY | SYLLABUS | UNIVERSITY QUESTION PAPER

AE6401 Aerodynamics - I -Semester IV-AERO-BE-Anna University

ae6401-aerodynamics-i-semester-iv-aero-be-anna-universityAE6401 Aerodynamics - I -Semester IV-AERO-BE-Anna University 
AERO SEM IV Syllabus, AERO SYLLABUS

 
 
 
 
 
AE6401                                             AERODYNAMICS - I                                                     L  T  P  C
3 0  0   3
OBJECTIVES:
<ul>
<li>To introduce  the  concepts  of  mass,  momentum  and  energy  conservation  relating  to aerodynamics.</li>
<li>To make the student understand the concept of vorticity, irrotationality, theory of airfoils and wing sections.</li>
<li>To introduce the basics of viscous flow.</li>
</ul>
 
UNIT I             INTRODUCTION TO LOW SPEED FLOW                                                                     9
Euler  equation,  incompressible  bernoulli’s  equation.  circulation  and  vorticity,  green’s  lemma  and stoke’s theorem, barotropic flow, kelvin’s theorem, streamline, stream function, irrotational flow, potential function, equipontential lines, elementary flows and their combinations.
 
UNIT II            TWO DIMENSIONAL INVISCID INCOMPRESSIBLE FLOW                                        9
Ideal Flow over a circular cylinder, D’Alembert’s paradox, magnus effect, Kutta joukowski’s theorem, starting vortex, kutta condition,  real flow over smooth and rough cylinder.
 
UNIT III           AIRFOIL THEORY                                                                                                          9
Cauchy-riemann relations, complex potential, methodology of conformal transformation, kutta- joukowski transformation and its applications, thin airfoil theory and its applications.
 
UNIT IV          SUBSONIC WING THEORY                                                                                           9
Vortex filament, biot and savart law, bound vortex and trailing vortex, horse shoe vortex, lifting line theory and its limitations.
 
UNIT V           INTRODUCTION TO BOUNDARY LAYER THEORY                                                    9
Boundary layer and boundary layer thickness, displacement thickness, momentum thickness, energy thickness, shape parameter, boundary layer equations for a steady, two dimensional incompressible flow, boundary layer growth over a flat plate, critical reynolds number, blasius solution, basics of turbulent flow.
 
 
OUTCOMES
<ul>
<li>An ability to apply airfoil theory to predict air foil perform</li>
<li>A knowledge of incompressible flow</li>
<li>An explosive to Boundary layer theory</li>
</ul>
 
TOTAL: 45 PERIODS
 
 
TEXT BOOKS:
<ol>
<li>Houghton, E.L., and Caruthers, N.B., "Aerodynamics for Engineering students", Edward Arnold</li>
</ol>
Publishers Ltd., London, 1989.
<ol start="2">
<li>Anderson, J.D., "Fundamentals of Aerodynamics", MaGraw Hill Book Co., 1999</li>
</ol>
 
REFERENCES:
<ol>
<li>Milne Thomson, L.H., "Theoretical Aerodynamics", Macmillan, 1985</li>
<li>John J Bertin., "Aerodynamics for Engineers", Pearson Education Inc, 2002</li>
<li>Clancey, L J.," Aerodynamics", Pitman, 1986</li>
<li>Kuethe, A.M and Chow, C.Y, “Foundations of Aerodynamics”, Fifth Edition, John Wiley & Sons,</li>
</ol>
2000.

AERO SEM IV Syllabus AERO SYLLABUS AE6401 Aerodynamics - I -Semester IV-AERO-BE-Anna University

ae6401-aerodynamics-i-semester-iv-aero-be-anna-universityAE6401 Aerodynamics - I -Semester IV-AERO-BE-Anna University AERO SEM IV Syllabus, AERO SYLLABUS AE6401 AERODYNAMICS - I …

MA6459 Numerical Methods -Semester IV-AERO-BE-Anna University

ma6459-numerical-methods-semester-iv-aero-be-anna-universityMA6459 Numerical Methods -Semester IV-AERO-BE-Anna University 
AERO SEM IV Syllabus, AERO SYLLABUS

 
 
 
 
 
MA6459                                         NUMERICAL  METHODS                                                  L  T  P  C
3 1  0   4
OBJECTIVES
<ul>
<li>This course aims at providing the necessary basic concepts of a few numerical methods and give procedures for solving numerically different kinds of problems occurring in engineering and technology</li>
</ul>
 
UNIT I             SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS                             10+3
Solution of algebraic and transcendental equations - Fixed point iteration method – Newton Raphson method- Solution of linear system of equations - Gauss elimination method – Pivoting - Gauss Jordan method – Iterative methods of Gauss Jacobi and Gauss Seidel - Matrix Inversion by Gauss Jordan method - Eigenvalues of a matrix by Power method.
 
UNIT II            INTERPOLATION  AND  APPROXIMATION                                                             8+3
Interpolation with unequal intervals - Lagrange's interpolation – Newton’s divided difference interpolation – Cubic Splines - Interpolation with equal intervals - Newton’s forward and backward difference formulae.
 
UNIT III           NUMERICAL  DIFFERENTIATION  AND  INTEGRATION                                        9+3
Approximation   of   derivatives   using   interpolation   polynomials   -   Numerical   integration   using Trapezoidal,  Simpson’s  1/3  rule  –  Romberg’s  method  -  Two  point  and  three  point  Gaussian quadrature formulae – Evaluation of double integrals by Trapezoidal and Simpson’s 1/3 rules.
 
UNIT IV           INITIAL  VALUE  PROBLEMS  FOR  ORDINARY  DIFFERENTIAL
EQUATIONS                                                                                                              9+3
Single Step methods - Taylor’s series method - Euler’s method - Modified Euler’s method - Fourth order Runge-Kutta method for solving first order equations - Multi step methods - Milne’s and Adams- Bashforth predictor corrector methods for solving first order equations.
 
UNIT V           BOUNDARY  VALUE  PROBLEMS IN ORDINARY  AND  PARTIAL
DIFFERENTIAL  EQUATIONS                                                                                   9+3
Finite difference methods for solving two-point linear boundary value problems - Finite difference techniques for the solution of two dimensional Laplace’s and Poisson’s equations on rectangular domain – One dimensional heat flow equation by explicit and implicit (Crank Nicholson) methods – One dimensional wave equation by explicit method.
 
 
OUTCOMES
 
TOTAL (L:45+T:15): 60 PERIODS
 
<ul>
<li>The students will have a clear perception of the power of numerical techniques, ideas and would be able to demonstrate the applications of these techniques to problems drawn from industry, management and other engineering fields.</li>
</ul>
 
TEXT BOOKS
<ol>
<li>Grewal. B.S., and Grewal. J.S., " Numerical  methods  in  Engineering  and  Science", Khanna</li>
</ol>
Publishers, New Delhi, 9th Edition, 2007.
<ol start="2">
<li>Gerald. C. F., and Wheatley. P. O., " Applied  Numerical  Analysis", Pearson Education, Asia, New Delhi, 6th Edition, 2006.</li>
</ol>
 
REFERENCES
<ol>
<li>Chapra.  S.C.,   and   Canale.R.P.,   "Numerical   Methods   for   Engineers,   5th     Edition,   Tata</li>
</ol>
McGraw - Hill, New Delhi, 2007.
<ol start="2">
<li>Brian Bradie. "A friendly introduction to Numerical analysis", Pearson Education, Asia, New Delhi,</li>
</ol>
2007.
<ol start="3">
<li>Sankara Rao. K., "Numerical methods for Scientists and Engineers", 3rd Edition, Prentice Hall of</li>
</ol>
India Private Ltd., New Delhi, 2007.

AERO SEM IV Syllabus AERO SYLLABUS MA6459 Numerical Methods -Semester IV-AERO-BE-Anna University

ma6459-numerical-methods-semester-iv-aero-be-anna-universityMA6459 Numerical Methods -Semester IV-AERO-BE-Anna University AERO SEM IV Syllabus, AERO SYLLABUS MA6459 NUMERICAL METHODS …

AE6312 CAM and Manufacturing Laboratory -Semester III-AERO-BE-Anna University

ae6312-cam-and-manufacturing-laboratory-semester-iii-aero-be-anna-universityAE6312 CAM and Manufacturing Laboratory -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
AE6312                         CAM AND MANUFACTURING LABORATORY                             L  T   P  C
0   0 3   2
OBJECTIVES
<ul>
<li>To teach and train the students in the lab about the design and drafting of aero components</li>
</ul>
 
LIST OF EXPERIMENTS
<ol>
<li>Design and modeling of rectangular plate with hole.</li>
<li>Design and modeling of spar components.</li>
<li>Design and modeling of aerofoil sections.</li>
<li>Design and modeling of cut section for wings.</li>
<li>Design and modeling of machine component.</li>
<li>Design and modeling of bulk head.</li>
<li>Design and analysis of a truss.</li>
<li>Design and analysis of beam distributed load.</li>
<li>Facing and Turning (Taper, Step) operations in CNC.</li>
<li>Drilling operations in CNC.</li>
</ol>
 
OUTCOMES
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TOTAL: 45 PERIODS
 
Ability to design and model difficult aero component and perform structural analysis using available software packages
 
LIST OF EQUIPMENTS FOR A BATCH OF 30 STUDENTS
<table>
<tbody>
<tr>
<td width="63">
Sl.No.
</td>
<td width="244">
Name of the Equipment
</td>
<td width="110">
Quantity
</td>
<td width="161">
Experiment No.
</td>
</tr>
<tr>
<td width="63">
1
</td>
<td width="244">
Computer nodes
</td>
<td width="110">
30
</td>
<td width="161">
1 to 8
</td>
</tr>
<tr>
<td width="63">
2
</td>
<td width="244">
Modeling Packages
</td>
<td width="110">
30 licenses
</td>
<td width="161">
1 to 6
</td>
</tr>
<tr>
<td width="63">
3
</td>
<td width="244">
FEA&CAM SOFTWARE
</td>
<td width="110">
30 licenses
</td>
<td width="161">
7 & 8
</td>
</tr>
<tr>
<td width="63">
4
</td>
<td width="244">
UPS
</td>
<td width="110">
1
</td>
<td width="161">
1 to 8
</td>
</tr>
<tr>
<td width="63">
5.
</td>
<td width="244">
CNC Machine
</td>
<td width="110">
1
</td>
<td width="161">
9,10
</td>
</tr>
<tr>
<td width="63">
5
</td>
<td width="244">
Printer
</td>
<td width="110">
2
</td>
<td width="161">
All
</td>
</tr>
</tbody>
</table>

AERO SEM III Syllabus AERO SYLLABUS AE6312 CAM and Manufacturing Laboratory -Semester III-AERO-BE-Anna University

AE6311 Thermodynamics Laboratory -Semester III-AERO-BE-Anna University

ae6311-thermodynamics-laboratory-semester-iii-aero-be-anna-universityAE6311 Thermodynamics Laboratory -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
AE6311                                THERMODYNAMICS LABORATORY                                            L  T P  C
0   0 3  2
OBJECTIVES
<ul>
<li>To enhance the basic knowledge in applied thermodynamics</li>
</ul>
 
LIST OF EXPERIMENTS
<table>
<tbody>
<tr>
<td width="37">
1.
</td>
<td width="478">
Performance test on a 4-stroke engine
</td>
<td rowspan="10" width="152">
 
</td>
</tr>
<tr>
<td width="37">
2.
</td>
<td width="478">
Valve timing of a 4 – stroke engine and port timing of a 2 stroke engine
</td>
</tr>
<tr>
<td width="37">
3.
</td>
<td width="478">
Determination of effectiveness of a parallel flow heat exchanger
</td>
</tr>
<tr>
<td width="37">
4.
</td>
<td width="478">
Determination of effectiveness of a counter flow heat exchanger
</td>
</tr>
<tr>
<td width="37">
5.
</td>
<td width="478">
Determination of heating value of a fuel
</td>
</tr>
<tr>
<td width="37">
6.
</td>
<td width="478">
Determination of specific heat of solid
</td>
</tr>
<tr>
<td width="37">
7.
</td>
<td width="478">
Determination of thermal conductivity of solid.
</td>
</tr>
<tr>
<td width="37">
8.
</td>
<td width="478">
Determination of thermal resistance of a composite wall.
</td>
</tr>
<tr>
<td width="37">
9.
</td>
<td width="478">
COP test on a vapour compression refrigeration test rig
</td>
</tr>
<tr>
<td width="37">
10.
</td>
<td width="478">
COP test on a vapour compression air-conditioning test rig
</td>
</tr>
<tr>
<td width="37">
 
</td>
<td width="478">
 
</td>
<td width="152">
TOTAL: 45 PERIODS
</td>
</tr>
</tbody>
</table>
OUTCOMES
<ul>
<li>Ability to perform test on diesel/petrol engine</li>
<li>Ability to explain the characteristics of the diesel/Petrol engine</li>
<li>Ability to determine the properties of the fuels.</li>
</ul>
 
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS
 
<table>
<tbody>
<tr>
<td width="55">
 
Sl.No
</td>
<td width="349">
 
Details of Equipments
</td>
<td width="62">
Qty
Req.
</td>
<td width="102">
Experiment
No.
</td>
</tr>
<tr>
<td width="55">
1.
</td>
<td width="349">
4 stroke twin cylinder diesel engine
</td>
<td width="62">
1
</td>
<td width="102">
1
</td>
</tr>
<tr>
<td width="55">
2.
</td>
<td width="349">
Cut section model of 4 stroke diesel engine and cut section model of 2 stroke petrol engine
</td>
<td width="62">
1
</td>
<td width="102">
2
</td>
</tr>
<tr>
<td width="55">
3.
</td>
<td width="349">
Parallel and counter flow heat exchanger test rig
</td>
<td width="62">
1
</td>
<td width="102">
3,4
</td>
</tr>
<tr>
<td width="55">
4.
</td>
<td width="349">
Bomb Calorimeter
</td>
<td width="62">
1
</td>
<td width="102">
5
</td>
</tr>
<tr>
<td width="55">
5.
</td>
<td width="349">
Vapour compression refrigeration test rig
</td>
<td width="62">
1
</td>
<td width="102">
9
</td>
</tr>
<tr>
<td width="55">
6.
</td>
<td width="349">
Vapour compression air-conditioning test rig
</td>
<td width="62">
1
</td>
<td width="102">
10
</td>
</tr>
<tr>
<td width="55">
7.
</td>
<td width="349">
Conductive heat transfer set up
</td>
<td width="62">
1
</td>
<td width="102">
7
</td>
</tr>
<tr>
<td width="55">
8.
</td>
<td width="349">
Composite wall
</td>
<td width="62">
1
</td>
<td width="102">
8
</td>
</tr>
</tbody>
</table>

AERO SEM III Syllabus AERO SYLLABUS AE6311 Thermodynamics Laboratory -Semester III-AERO-BE-Anna University

CE6461 Fluid Mechanics and Machinery Laboratory -Semester III-AERO-BE-Anna University

ce6461-fluid-mechanics-and-machinery-laboratory-semester-iii-aero-be-anna-universityCE6461 Fluid Mechanics and Machinery Laboratory -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
 
 
 
CE6461                  FLUID MECHANICS AND MACHINERY LABORATORY                      L  T  P  C
0  0 3  2
OBJECTIVES:
Upon Completion of this subject, the students can able to have hands on experience in flow measurements using different devices and also perform calculation related to losses in pipes and also perform characteristic study of pumps, turbines etc.,
 
LIST OF EXPERIMENTS
<ol>
<li>Determination of the Coefficient of discharge of given Orifice meter.</li>
<li>Determination of the Coefficient of discharge of given Venturi meter.</li>
<li>Calculation of the rate of flow using Rota meter.</li>
<li>Determination of friction factor for a given set of pipes.</li>
<li>Conducting experiments and drawing the characteristic curves of centrifugal pump/ submergible pump</li>
<li>Conducting experiments and drawing the characteristic curves of reciprocating pump.</li>
<li>Conducting experiments and drawing the characteristic curves of Gear pump.</li>
<li>Conducting experiments and drawing the characteristic curves of Pelton wheel.</li>
<li>Conducting experiments and drawing the characteristics curves of Francis turbine.</li>
<li>Conducting experiments and drawing the characteristic curves of Kaplan turbine.</li>
</ol>
TOTAL: 45 PERIODS
OUTCOMES:
<ul>
<li>Ability to use the measurement equipments for flow measurement</li>
<li>Ability to do performance trust on different fluid machinery</li>
</ul>
 
<table>
<tbody>
<tr>
<td width="552">
<table width="100%">
<tbody>
<tr>
<td>
<table>
<tbody>
<tr>
<td width="64">
S. No.
</td>
<td width="375">
NAME OF THE EQUIPMENT
</td>
<td width="108">
Qty.
</td>
</tr>
<tr>
<td width="64">
1
</td>
<td width="375">
Orifice meter setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
2
</td>
<td width="375">
Venturi meter setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
3
</td>
<td width="375">
Rotameter setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
4
</td>
<td width="375">
Pipe Flow analysis setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
5
</td>
<td width="375">
Centrifugal pump/submergible pump setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
6
</td>
<td width="375">
Reciprocating pump setup
</td>
<td width="108">
1
</td>
</tr>
</tbody>
</table>
 
</td>
</tr>
</tbody>
</table>
 </td>
</tr>
</tbody>
</table>
LIST OF EQUIPMENT  FOR BATCH OF 30 STUDENTS
 
 
<table>
<tbody>
<tr>
<td width="64">
7
</td>
<td width="375">
Gear pump setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
8
</td>
<td width="375">
Pelton wheel setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
9
</td>
<td width="375">
Francis turbine setup
</td>
<td width="108">
1
</td>
</tr>
<tr>
<td width="64">
10
</td>
<td width="375">
Kaplan turbine setup
</td>
<td width="108">
1
</td>
</tr>
</tbody>
</table>

AERO SEM III Syllabus AERO SYLLABUS CE6461 Fluid Mechanics and Machinery Laboratory -Semester III-AERO-BE-Anna University

CE6315 Strength of Materials Laboratory -Semester III-AERO-BE-Anna University

ce6315-strength-of-materials-laboratory-semester-iii-aero-be-anna-universityCE6315 Strength of Materials Laboratory -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
CE6315                         STRENGTH OF MATERIALS LABORATORY                                 L T  P  C
0 0  3 2
OBJECTIVES
To supplement the theoretical knowledge gained in Mechanics of Solids with practical testing for determining the strength of materials under externally applied loads. This would enable the student to have a clear understanding of the design for strength and stiffness
 
LIST OF EXPERIMENTS
<ol>
<li>Tension test on a mild steel rod</li>
<li>Double shear test on Mild steel and Aluminium rods</li>
<li>Torsion test on mild steel rod</li>
<li>Impact test on metal specimen</li>
<li>Hardness test on metals - Brinnell and Rockwell Hardness Number</li>
<li>Deflection test on beams</li>
<li>Compression test on helical springs</li>
<li>Strain Measurement using Rosette strain gauge</li>
<li>Effect of hardening- Improvement in hardness and impact resistance of steels.</li>
<li>Tempering- Improvement Mechanical properties Comparison</li>
</ol>
(i) Unhardened specimen
(ii) Quenched Specimen and
(iii) Quenched and tempered specimen.
<ol start="11">
<li>Microscopic Examination of</li>
</ol>
(i) Hardened samples and
(ii) Hardened and tempered samples.
 
 
OUTCOMES:
<ul>
<li>Ability to perform different destructive testing</li>
<li>Ability to characteristic materials</li>
</ul>
 
TOTAL: 45 PERIODS
 
LIST OF EQUIPMENT FOR BATCH OF 30 STUDENTS
 
<table>
<tbody>
<tr>
<td width="64">
S.No.
</td>
<td width="463">
NAME OF THE EQUIPMENT
</td>
<td width="89">
Qty.
</td>
</tr>
<tr>
<td width="64">
1
</td>
<td width="463">
Universal Tensile Testing machine with double 1 shear attachment –
40 Ton Capacity
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
2
</td>
<td width="463">
Torsion Testing Machine (60 NM Capacity)
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
3
</td>
<td width="463">
Impact Testing Machine (300 J Capacity)
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
4
</td>
<td width="463">
Brinell Hardness Testing Machine
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
5
</td>
<td width="463">
Rockwell Hardness Testing Machine
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
6
</td>
<td width="463">
Spring Testing Machine for tensile and compressive loads (2500 N)
</td>
<td width="89">
1
</td>
</tr>
<tr>
<td width="64">
7
</td>
<td width="463">
Metallurgical Microscopes
</td>
<td width="89">
3
</td>
</tr>
<tr>
<td width="64">
8
</td>
<td width="463">
Muffle Furnace (800 C)
</td>
<td width="89">
1
</td>
</tr>
</tbody>
</table>

AERO SEM III Syllabus AERO SYLLABUS CE6315 Strength of Materials Laboratory -Semester III-AERO-BE-Anna University

AE6302 Elements of Aeronautics -Semester III-AERO-BE-Anna University

ae6302-elements-of-aeronautics-semester-iii-aero-be-anna-universityAE6302 Elements of Aeronautics -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
AE6302                                       ELEMENTS OF AERONAUTICS                                          L  T  P  C
3 0  0 3
OBJECTIVES:
<ul>
<li>To introduce the concepts of flying, International standard atmosphere, structural aspects of airplanes, brief description of systems, instruments and power plants used in airplanes.</li>
</ul>
 
UNIT I             HISTORY OF FLIGHT                                                                                                    8
Balloon flight – ornithopters - early airplanes by wright brothers, biplanes and monoplanes, developments in aerodynamics, materials, structures and propulsion over the years.
 
UNIT II            BASICS OF FLIGHT MECHANICS                                                                               9
Physical properties and structure of the atmosphere, temperature, pressure and altitude relationships, newton’s law of motions applied to aeronautics - evolution of lift, drag and moment. aerofoils, mach number, maneuvers.
 
UNIT III           AIRCRAFT CONFIGURATIONS                                                                                  10
Different types of flight vehicles, classifications. components of an airplane and their functions. conventional control, powered control, basic instruments for flying - typical systems for control actuation.
 
UNIT IV          AIRPLANE STRUCTURES AND MATERIALS                                                              9
General types of construction, monocoque, semi-monocoque and geodesic constructions, typical wing and fuselage structure. metallic and non-metallic materials, use of aluminium alloy, titanium, stainless steel and composite materials. stresses and strains –  hooke’s law – stress - strain diagrams -  elastic constants.
 
UNIT V           POWER PLANTS                                                                                                           9
Basic ideas about piston, turboprop and jet engines - use of propeller and jets for thrust production - comparative merits, principles of operation of rocket, types of rockets and typical applications, exploration into space.
 
 
OUTCOMES
<ul>
<li>Identify the component of Flight</li>
<li>Identify suitable materials for Aircraft structure</li>
</ul>
 
TOTAL: 45 PERIODS
 
<ul>
<li>Perform basic calculation on Mechanics using Newton law for lift, drag and moment.</li>
</ul>
 
TEXT BOOKS:
<ol>
<li>Anderson, J.D., “Introduction to Flight”, McGraw-Hill, 1995.</li>
<li>Stephen. A. Brandt, "Introduction to Aeronautics: A design perspective" American Institute of</li>
</ol>
Aeronautics & Astronautics,1997
 
REFERENCES:
<ol>
<li>Kermode, A.C., “Mechanics of Flight”, Himalayan Book, 1997</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS AE6302 Elements of Aeronautics -Semester III-AERO-BE-Anna University

CE6452 Solid Mechanics -Semester III-AERO-BE-Anna University

ce6452-solid-mechanics-semester-iii-aero-be-anna-universityCE6452 Solid Mechanics -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
<table>
<tbody>
<tr>
<td width="154">
CE6452
</td>
<td width="338">
SOLID MECHANICS
</td>
<td width="152">
L  T  P
</td>
<td width="17">
C
</td>
</tr>
<tr>
<td width="154">
 
</td>
<td width="338">
 
</td>
<td width="152">
3   0 0
</td>
<td width="17">
3
</td>
</tr>
</tbody>
</table>
OBJECTIVES:
<ul>
<li>To introduce various behavior of structural components under various loading conditions.</li>
</ul>
 
UNIT I             INTRODUCTION                                                                                                           8
Definition of stress, strain and their relations – relations between material constants – axial loading - statically determinate and indeterminate problems in tension & compression – plane truss analysis – method of joints – method of sections – 3-D trusses – thermal stresses – impact loading.
 
UNIT II            STRESSES IN BEAMS                                                                                                10
Shear force & bending moment diagrams: bending and shear stress variation in beams of symmetric sections, a typical spar section: beams of uniform strength -  beams of two materials.
 
UNIT III           DEFLECTION OF BEAMS                                                                                           10
Double integration method – macaulay’s method – moment area method – conjugate beam method –
principle of superposition – maxwell’s reciprocal theorem.
 
UNIT  IV         TORSION – SPRINGS – COLUMNS                                                                           10
Torsion of solid and hollow circular shafts – shear stress variation – open and closed-coiled helical springs – stresses in helical springs – classification of columns – euler buckling – columns with different end conditions.
 
UNIT  V          BIAXIAL STRESSES                                                                                                     7
Stresses in thin-walled pressure vessels – combined loading of circular shaft with bending, torsion and axial loadings – Mohr’s circle and its construction – determination of principal stresses.
TOTAL: 45 PERIODS
OUTCOMES
<ul>
<li>Solve the problems related to the structural components under various loading conditions.</li>
</ul>
 
TEXT BOOKS:
<ol>
<li>William Nash, "Strength of Materials", Tata McGraw Hill, 2004</li>
<li>Timoshenko and Young “Strength of Materials” Vol. I & II</li>
</ol>
 
REFERENCES:
<ol>
<li>Dym,C.L., and Shames,I.H., ‘Solid Mechanics’, McGraw Hill, Kogakusha, Tokyo, 1973.</li>
<li>Stephen Timoshenko, ‘Strength of Materials’, Vol I & II, CBS Publishers and Distributors, Third</li>
</ol>
Edition.
<ol start="3">
<li>Timoshenko,S. and Young, D.H., ‘Elements of Strength of Materials’, T.Van Nostrand Co. Inc., Princeton, N.J., 1977.</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS CE6452 Solid Mechanics -Semester III-AERO-BE-Anna University

ce6452-solid-mechanics-semester-iii-aero-be-anna-universityCE6452 Solid Mechanics -Semester III-AERO-BE-Anna University AERO SEM III Syllabus, AERO SYLLABUS CE6452 SOLID MECHANICS L T P C 3 0 0 3 OBJECTIVES: To introduce various beh…

CE6451 Fluid Mechanics and Machinery -Semester III-AERO-BE-Anna University

ce6451-fluid-mechanics-and-machinery-semester-iii-aero-be-anna-universityCE6451 Fluid Mechanics and Machinery -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
CE6451                             FLUID MECHANICS AND MACHINERY                                       L  T  P  C
3 0  0 3
OBJECTIVES:
<ul>
<li>The applications of the conservation laws to flow through pipes and hydraulic machines are studied</li>
<li>To understand the importance of dimensional analysis.</li>
<li>To understand the importance of various types of flow in pumps and turbines.</li>
</ul>
 
UNIT I             FLUID PROPERTIES AND FLOW CHARACTERISTICS                                              8
Units and dimensions- Properties of fluids- mass density, specific weight, specific volume, specific gravity, viscosity, compressibility, vapor pressure, surface tension and capillarity. Flow characteristics
– concept of control volume - application of continuity equation, energy equation and momentum
equation.
 
UNIT II            FLOW THROUGH CIRCULAR CONDUITS                                                                   8
Hydraulic and energy gradient - Laminar flow through circular conduits and circular annuli-Boundary layer concepts – types of boundary layer thickness – Darcy Weisbach equation –friction factor- Moody diagram- commercial pipes- minor losses – Flow through pipes in series and parallel.
 
UNIT III           DIMENSIONAL ANALYSIS                                                                                           9
Need for dimensional analysis – methods of dimensional analysis – Similitude –types of similitude - Dimensionless parameters- application of dimensionless parameters – Model analysis.
 
UNIT IV          PUMPS                                                                                                                          10
Impact of jets - Euler’s equation - Theory of roto-dynamic machines – various efficiencies– velocity components at entry and exit of the rotor- velocity triangles - Centrifugal pumps– working principle - work done by the impeller - performance curves - Reciprocating pump- working principle – Rotary pumps –classification.
 
UNIT V           TURBINES                                                                                                                    10
Classification of turbines – heads and efficiencies – velocity triangles. Axial, radial and mixed flow turbines. Pelton wheel,  Francis turbine and Kaplan turbines- working principles - work done by water on the runner – draft tube. Specific speed - unit quantities – performance curves for turbines – governing of turbines.
 
 
OUTCOMES:
 
TOTAL: 45 PERIODS
 
<ul>
<li>Upon completion of this course, the students can able to apply mathematical knowledge to predict the properties and characteristics of a fluid.</li>
<li>Can critically analyse the performance of pumps and turbines.</li>
</ul>
 
TEXT BOOK:
<ol>
<li>Modi P.N. and Seth, S.M. "Hydraulics and Fluid Mechanics", Standard Book House, New Delhi</li>
</ol>
2004.
 
REFERENCES:
<ol>
<li>Streeter, V. L. and Wylie E. B., "Fluid Mechanics", McGraw Hill Publishing Co. 2010</li>
<li>Kumar K. L., "Engineering Fluid Mechanics", Eurasia Publishing House(p) Ltd., New Delhi</li>
</ol>
2004
<ol start="3">
<li>Robert W.Fox, Alan T. McDonald, Philip J.Pritchard, “Fluid Mechanics and Machinery”, 2011.</li>
<li>Graebel. W.P, "Engineering Fluid Mechanics", Taylor & Francis, Indian Reprint, 2011</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS CE6451 Fluid Mechanics and Machinery -Semester III-AERO-BE-Anna University

AE6301 Aero Engineering Thermodynamics -Semester III-AERO-BE-Anna University

ae6301-aero-engineering-thermodynamics-semester-iii-aero-be-anna-universityAE6301 Aero Engineering Thermodynamics -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
AE6301                               AERO ENGINEERING THERMODYNAMICS                              L  T  P  C
3   0 0  3
OBJECTIVES:
<ul>
<li>To achieve  an  understanding  of  principles  of  thermodynamics  and  to  be  able  to  use  it  in accounting for the bulk behavior of the simple physical systems.</li>
<li>To provide  in-depth  study  of  thermodynamic  principles,  thermodynamics  of  state,  basic thermodynamic relations, Properties of pure substances</li>
<li>To enlighten the basic concepts of heat transfer and propulsion cycles.</li>
</ul>
 
UNIT I             BASIC CONCEPT AND FIRST LAW                                                                              9
Concept of continuum, macroscopic approach, thermodynamic systems – closed, open and isolated. Property, state, path and process, quasi-static process, work, modes of work, Zeroth law of thermodynamics- concept of temperature and heat, internal energy, specific heat capacities, enthalpy
- concept of ideal and real gases. First law of thermodynamics - applications to closed and open systems - steady flow processes with reference to various thermal equipments.
 
UNIT II            SECOND LAW AND ENTROPY                                                                                      9
Second law of thermodynamics – kelvin planck and clausius statements of second law. Reversibility and irreversibility - carnot theorem. carnot cycle, reversed carnot cycle, efficiency, COP - thermodynamic temperature scale - clausius inequality, concept of entropy, entropy of ideal gas, principle of increase of entropy.
 
UNIT III           THERMODYNAMIC AVAILABILITY AND AIR STANDARD CYCLES                         9
Basics – energy in non-flow processes: expressions for the energy of a closed system – equivalence between mechanical energy forms and exergy – flow of energy associated with heat flow – exergy consumption and entropy generation - exergy in steady flow processes: expressions for exergy in steady flow processes – exergy dissipation and entropy generation - otto, diesel, dual and brayton cycles - air standard efficiency - mean effective pressure.
 
UNIT IV          PROPERTIES OF PURE SUBSTANCE AND POWER CYCLE                                   8
Properties of pure substances – thermodynamic properties of pure substances in solid, liquid and vapour phases, phase rule, P-V, P-T, T-V, T-S, H-S diagrams, PVT surfaces, thermodynamic properties of steam - calculations of work done and heat transfer in non-flow and flow processes - standard rankine cycle, reheat and regeneration cycle.
 
UNIT V           BASICS OF PROPULSION AND HEAT TRANSFER                                                   10
Classification of jet engines - simple jet propulsion system – thrust equation – specific impulse –ideal and non-ideal cycle analysis - conduction in parallel, radial and composite wall – basics of convective and radiation heat transfer.
TOTAL: 45 PERIODS
(Use of standard thermodynamic tables, Mollier diagram and tables are permitted)
 
OUTCOMES
<ul>
<li>Apply Mathematical foundations, principles in solving thermodynamics problems.</li>
<li>Critically analyse the problem, and solve the problems related to heat transfer and propulsion</li>
</ul>
 
TEXT BOOKS:
<ol>
<li>Nag.P.K., “Engineering Thermodynamics”, Tata McGraw-Hill, New Delhi, 2007.</li>
<li>Rathakrishnan E., “Fundamentals of Engineering Thermodynamics”, Prentice-Hall India, 2005.</li>
</ol>
 
REFERENCES:
<ol>
<li>Ramalingam K.K. “Thermodynamics”, Sci-Tech Publications, 2006</li>
<li>Holman.J.P., “Thermodynamics”, 3rd Edition, McGraw-Hill, 2007.</li>
<li>Venwylen and Sontag, “Classical Thermodynamics”, Wiley Eastern, 1987</li>
<li>Arora C.P, “ Thermodynamics”, Tata McGraw-Hill, New Delhi, 2003.</li>
<li>Merala C, Pother, Craig W, Somerton, “Thermodynamics for Engineers”, Schaum Outline Series, Tata McGraw-Hill, New Delhi, 2004.</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS AE6301 Aero Engineering Thermodynamics -Semester III-AERO-BE-Anna University

ME6352 Manufacturing Technology -Semester III-AERO-BE-Anna University

me6352-manufacturing-technology-semester-iii-aero-be-anna-universityME6352 Manufacturing Technology -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
 
 
 
ME6352                                     MANUFACTURING TECHNOLOGY                                     L  T  P  C
3   0 0  3
OBJECTIVES
<ul>
<li>The automobile components such as piston, connecting rod, crankshaft, engine block, front axle, frame, body etc., are manufactured by various types of production processes involving casting, welding, machining, metal forming, power metallurgy etc. Hence B.E. Automobile Engineering students must study this course Production Technology.</li>
</ul>
 
UNIT I             CASTING                                                                                                                         8
Casting types,  procedure to make sand mould,  types  of  core making,  moulding  tools, machine moulding, special moulding processes – CO2 moulding; shell moulding, investment moulding, permanent mould casting, pressure die casting, centrifugal casting, continuous casting, casting defects.
 
UNIT II            WELDING                                                                                                                       8
Classification of welding processes. Principles of Oxy-acetylene gas welding. A.C metal arc welding, resistance welding, submerged arc welding, tungsten inert gas welding, metal inert gas welding, plasma arc welding, thermit welding, electron beam welding, laser beam welding, defects in welding, soldering and brazing.
 
UNIT III           MACHINING                                                                                                                  13
General principles (with schematic diagrams only) of working and commonly performed operations in the following machines: Lathe, Shaper, Planer, Horizontal milling machine, Universal drilling machine, Cylindrical grinding machine, Capstan and Turret lathe. Basics of CNC machines. General principles and applications of the following processes: Abrasive jet machining, Ultrasonic machining, Electric discharge machining, Electro chemical machining, Plasma arc machining, Electron beam machining and Laser beam machining.
 
UNIT IV          FORMING AND SHAPING OF PLASTICS                                                                      7
Types  of  plastics  -  Characteristics  of  the  forming  and  shaping  processes   –  Moulding  of Thermoplastics – Working principles and typical applications of - Injection moulding – Plunger and screw machines – Blow moulding – Rotational moulding – Film blowing – Extrusion - Typical industrial applications – Thermoforming – Processing of Thermosets – Working principles and typical applications - Compression moulding – Transfer moulding – Bonding of Thermoplastics – Fusion and solvent methods – Induction and Ultrasonic methods
 
UNIT V           METAL FORMING AND POWDER METALLURGY                                                      9
Principles and applications of the following processes: Forging, Rolling, Extrusion, Wire drawing and Spinning, Powder metallurgy – Principal steps involved advantages, disadvantages and limitations of powder metallurgy.
TOTAL: 45 PERIODS
 
OUTCOMES:
<ul>
<li>The Students can able to use different manufacturing process and use this in industry for component production</li>
</ul>
 
TEXT BOOKS
<ol>
<li>Hajra Choudhury, “Elements of Workshop Technology”, Vol. I and II, Media Promoters and</li>
</ol>
Publishers Pvt., Ltd., Mumbai, 2005.
<ol start="2">
<li>Nagendra Parashar B.S. and Mittal R.K., “Elements of Manufacturing Processes”, Prentice-Hall of India Private Limited, 2007.</li>
</ol>
 
REFERENCES
<ol>
<li>Serope Kalpajian,  Steven  R.Schmid,  “Manufacturing  Processes  for  Engineering  Materials”, Fourth Edition, Pearson Education, Inc. 2007.</li>
<li>Jain. R.K. and S.C. Gupta, “Production Technology”, Khanna Publishers. 16th Edition,2001.</li>
<li>“H.M.T. Production Technology – Handbook”, Tata McGraw-Hill, 2000.</li>
<li>Roy. A. Linberg, “Process and Materials of Manufacture”, PHI, 2000.</li>
<li>Adithan. M and Gupta. A.B., “Manufacturing Technology”, New Age, 2006.</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS ME6352 Manufacturing Technology -Semester III-AERO-BE-Anna University

MA6351 Transforms and Partial Differential Equations -Semester III-AERO-BE-Anna University

ma6351-transforms-and-partial-differential-equations-semester-iii-aero-be-anna-universityMA6351 Transforms and Partial Differential Equations -Semester III-AERO-BE-Anna University 
AERO SEM III Syllabus, AERO SYLLABUS

 
 
 
MA6351            TRANSFORMS  AND  PARTIAL  DIFFERENTIAL  EQUATIONS                L  T P  C
3 1  0  4
OBJECTIVES
<ul>
<li>To introduce Fourier series analysis which is central to many applications in engineering apart from its use in solving boundary value problems.</li>
<li>To acquaint the student with Fourier transform techniques used in wide variety of situations.</li>
<li>To introduce the effective mathematical tools for the solutions of partial differential equations that model several physical processes and to develop Z transform techniques for discrete time</li>
</ul>
systems.
 
UNIT I             PARTIAL  DIFFERENTIAL  EQUATIONS                                                               9 + 3
Formation of partial differential equations – Singular integrals -- Solutions of standard types of first order partial differential equations - Lagrange’s linear equation -- Linear partial differential equations of second and higher order with constant coefficients of both homogeneous and non-homogeneous types.
 
UNIT II            FOURIER SERIES                                                                                                   9 + 3
Dirichlet’s conditions – General Fourier series – Odd and even functions – Half range sine series – Half range cosine series – Complex form of Fourier series – Parseval’s identity – Harmonic analysis.
 
UNIT III           APPLICATIONS  OF PARTIAL  DIFFERENTIAL  EQUATIONS                           9 + 3
Classification of PDE – Method of separation of variables - Solutions of one dimensional wave equation – One dimensional equation of heat conduction  – Steady state solution of two dimensional equation of heat conduction (excluding insulated edges).
 
UNIT IV          FOURIER TRANSFORMS                                                                                      9 + 3
Statement   of   Fourier   integral   theorem       –   Fourier   transform   pair   –   Fourier   sine   and cosine transforms – Properties – Transforms of simple functions – Convolution theorem – Parseval’s identity.
 
UNIT V           Z - TRANSFORMS  AND  DIFFERENCE  EQUATIONS                                         9 + 3
Z- transforms - Elementary properties – Inverse Z - transform (using partial fraction and residues) – Convolution theorem - Formation of  difference  equations – Solution of difference  equations  using  Z
- transform.
 
 
OUTCOMES
 
TOTAL (L:45+T:15): 60 PERIODS
 
<ul>
<li>The understanding  of  the  mathematical  principles  on  transforms  and  partial  differential equations would provide them the ability to formulate and solve some of the physical problems of engineering.</li>
</ul>
 
TEXT BOOKS
<ol>
<li>Veerarajan. T., "Transforms and Partial Differential Equations", Tata McGraw Hill Education Pvt.</li>
</ol>
Ltd., New Delhi, Second reprint, 2012.
<ol start="2">
<li>Grewal. B.S., "Higher Engineering Mathematics", 42nd  Edition, Khanna Publishers, Delhi, 2012.</li>
<li>Narayanan.S., Manicavachagom  Pillay.T.K  and  Ramanaiah.G  "Advanced  Mathematics  for</li>
</ol>
Engineering Students"  Vol. II & III,  S.Viswanathan  Publishers  Pvt  Ltd. 1998.
 
REFERENCES
<ol>
<li>Bali.N.P and  Manish  Goyal,  "A  Textbook  of  Engineering  Mathematics",  7th   Edition,  Laxmi</li>
</ol>
Publications Pvt  Ltd , 2007.
<ol start="2">
<li>Ramana.B.V., "Higher Engineering Mathematics", Tata Mc-GrawHill Publishing Company Limited, NewDelhi, 2008.</li>
</ol>
 
<ol start="3">
<li>Glyn James, "Advanced Modern Engineering Mathematics", 3rd Edition, Pearson Education, 2007.</li>
<li>Erwin Kreyszig, "Advanced Engineering Mathematics", 8th Edition, Wiley India, 2007.</li>
<li>Ray Wylie. C and Barrett.L.C, "Advanced Engineering Mathematics" Tata Mc Graw Hill Education</li>
</ol>
Pvt Ltd, Sixth Edition, New Delhi, 2012.
<ol start="6">
<li>Datta.K.B., "Mathematical Methods of Science and Engineering", Cengage Learning India Pvt Ltd, Delhi, 2013.</li>
</ol>

AERO SEM III Syllabus AERO SYLLABUS MA6351 Transforms and Partial Differential Equations -Semester III-AERO-BE-Anna University

GE6262 Physics and Chemistry Laboratory - II -Semester II-AERO-BE-Anna University

ge6262-physics-and-chemistry-laboratory-ii-semester-ii-aero-be-anna-universityGE6262 Physics and Chemistry Laboratory - II -Semester II-AERO-BE-Anna University 
AERO SEM II Syllabus, AERO SYLLABUS

 
 
 
 
GE6262                        PHYSICS AND CHEMISTRY LABORATORY – II                            L  T  P  C
0  0 2  1
 
 
OBJECTIVES:
 
PHYSICS LABORATORY – II
 
<ul>
<li>To introduce different experiments to test basic understanding of physics concepts applied in optics, thermal physics and properties of matter.</li>
</ul>
 
LIST OF EXPERIMENTS (Any FIVE Experiments)
<ol>
<li>Determination of Young’s modulus by uniform bending method</li>
<li>Determination of band gap of a semiconductor</li>
<li>Determination of Coefficient of viscosity of a liquid –Poiseuille’s method</li>
<li>Determination of Dispersive power of a prism - Spectrometer</li>
<li>Determination of thickness  of  a thin wire – Air wedge method</li>
<li>Determination of Rigidity modulus – Torsion pendulum</li>
</ol>
OUTCOMES:
<ul>
<li>The students will have the ability to test materials by using their knowledge of applied physics principles in optics and properties of matter.</li>
</ul>
 
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:
 
<ol>
<li>Traveling microscope, meter scale, Knife edge, weights</li>
<li>Band gap experimental set up</li>
<li>Burette, Capillary tube, rubber tube, stop clock, beaker and weighing balance</li>
<li>spectrometer, prism, sodium vapour lamp.</li>
<li>Air-wedge experimental set up.</li>
<li>Torsion pendulum set up.</li>
</ol>
(vernier Caliper, Screw gauge, reading lens are required for most of the experiments)
 
 
 
OBJECTIVES:
 
CHEMISTRY LABORATORY - II
 
<ul>
<li>To make  the  student  acquire  practical  skills  in  the  wet  chemical  and  instrumental methods for quantitative estimation of hardness, alkalinity, metal ion content, corrosion in metals and cement analysis.</li>
</ul>
 
LIST OF EXPERIMENTS (Any FIVE Experiments)
1        Determination of alkalinity in water sample
2        Determination of total, temporary & permanent hardness of water by EDTA method
3        Estimation of copper content of the given solution by EDTA method
4        Estimation of iron content of the given solution using potentiometer
5        Estimation of sodium present in water using flame photometer
6        Corrosion experiment – weight loss method
7        Conductometric precipitation titration using BaCl2 and Na2SO4
8        Determination of CaO in Cement.
 
 
OUTCOMES:
 
TOTAL: 30 PERIODS
 
<ul>
<li>The students will be conversant with hands-on knowledge in the quantitative chemical analysis of water quality related parameters, corrosion measurement and cement analysis.</li>
</ul>
 
REFERENCES:
<ol>
<li>Daniel R. Palleros, “Experimental organic chemistry” John Wiley & Sons, Inc., New York, 2001.</li>
<li>Furniss B.S. Hannaford A.J, Smith P.W.G and Tatchel A.R., “Vogel’s Textbook of practical organic chemistry, LBS Singapore ,1994.</li>
<li>Jeffery G.H, Bassett J., Mendham J. and Denny R.C., “Vogel’s Text book of</li>
</ol>
quantitative analysis chemical analysis”, ELBS 5th Edn. Longman, Singapore publishers, Singapore, 1996.
<ol start="4">
<li>Kolthoff I.M. and Sandell E.B. et al. Quantitative chemical analysis, McMillan, Madras</li>
</ol>
1980
<ul>
<li> Laboratory classes on alternate weeks for Physics and Chemistry.</li>
</ul>
 
 
 
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:
<table>
<tbody>
<tr>
<td width="21">
1.
</td>
<td width="187">
Potentiometer
</td>
<td width="147">
-          5 Nos
</td>
</tr>
<tr>
<td width="21">
2.
</td>
<td width="187">
Flame photo meter
</td>
<td width="147">
-          5 Nos
</td>
</tr>
<tr>
<td width="21">
3.
</td>
<td width="187">
Weighing Balance
</td>
<td width="147">
-          5 Nos
</td>
</tr>
<tr>
<td width="21">
4.
</td>
<td width="187">
Conductivity meter
</td>
<td width="147">
-          5 Nos
</td>
</tr>
</tbody>
</table>
 
 
Common Apparatus : Pipette, Burette, conical flask, percelain tile, dropper (30 Nos each)

AERO SEM II Syllabus AERO SYLLABUS GE6262 Physics and Chemistry Laboratory - II -Semester II-AERO-BE-Anna University

GE6261 Computer Aided Drafting and Modeling Laboratory -Semester II-AERO-BE-Anna University

ge6261-computer-aided-drafting-and-modeling-laboratory-semester-ii-aero-be-anna-universityGE6261 Computer Aided Drafting and Modeling Laboratory -Semester II-AERO-BE-Anna University 
AERO SEM II Syllabus, AERO SYLLABUS

 
 
 
GE6261             COMPUTER AIDED DRAFTING AND MODELING LABORATORY          L  T  P C
0 1  2 2
OBJECTIVES:
<ul>
<li>To develop skill to use software to create 2D and 3D models.</li>
</ul>
 
LIST OF EXERCISES USING SOFTWARE CAPABLE OF DRAFTING AND MODELING
 
<ol>
<li>Study of capabilities of software for Drafting and Modeling – Coordinate systems (absolute, relative, polar, etc.) – Creation of simple figures like polygon and general multi-line figures.</li>
<li>Drawing of a Title Block with necessary text and projection symbol.</li>
<li>Drawing of curves like parabola, spiral, involute using Bspline or cubic spline.</li>
<li>Drawing of front view and top view of simple solids like prism, pyramid, cylinder, cone, etc, and dimensioning.</li>
<li>Drawing front view, top view and side view of objects from the given pictorial views (eg. V-</li>
</ol>
block, Base of a mixie, Simple stool, Objects with hole and curves).
 
<ol start="6">
<li>Drawing of a plan of residential building ( Two bed rooms, kitchen, hall, etc.)</li>
<li>Drawing of a simple steel truss.</li>
<li>Drawing sectional views of prism, pyramid, cylinder, cone, etc,</li>
<li>Drawing isometric projection of simple objects.</li>
<li>Creation of 3-D models of simple objects and obtaining 2-D multi-view drawings from 3-D</li>
</ol>
model.
Note: Plotting of drawings must be made for each exercise and attached to the records written by students.
 
 
OUTCOMES:
<ul>
<li>ability to use the software packers for drafting and modeling</li>
<li>ability to create 2D and 3D models of Engineering Components</li>
</ul>
 
TOTAL: 45 PERIODS
 
 
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS:
<table>
<tbody>
<tr>
<td width="52">
Sl.No
</td>
<td width="363">
Description of Equipment
</td>
<td width="105">
Quantity
</td>
</tr>
<tr>
<td width="52">
1.
</td>
<td width="363">
Pentium IV computer or better hardware, with suitable graphics facility
</td>
<td width="105">
30 No.
</td>
</tr>
<tr>
<td width="52">
2.
</td>
<td width="363">
Licensed software for Drafting and Modeling.
</td>
<td width="105">
30 Licenses
</td>
</tr>
<tr>
<td width="52">
3.
</td>
<td width="363">
Laser Printer or Plotter to print / plot drawings
</td>
<td width="105">
2 No.
</td>
</tr>
</tbody>
</table>

AERO SEM II Syllabus AERO SYLLABUS GE6261 Computer Aided Drafting and Modeling Laboratory -Semester II-AERO-BE-Anna University

GE6253 Engineering Mechanics Syllabus-Semester II-AERO-BE-Anna University

ge6253-engineering-mechanics-syllabus-semester-ii-aero-be-anna-universityGE6253 Engineering Mechanics Syllabus-Semester II-AERO-BE-Anna University 
AERO SEM II Syllabus, AERO SYLLABUS

 
 
GE6253                                            ENGINEERING MECHANICS                                         L  T P  C
3 1  0 4
OBJECTIVES:
<ul>
<li>To develop capacity to predict the effect of force and motion in the course of carrying out  the design functions of engineering.</li>
</ul>
 
UNIT I             BASICS AND STATICS OF PARTICLES                                                                    12
Introduction – Units and Dimensions – Laws of Mechanics – Lami’s theorem, Parallelogram and triangular Law of forces –– Vectorial representation of forces – Vector operations of forces -additions, subtraction, dot product, cross product – Coplanar Forces – rectangular components – Equilibrium of a particle – Forces in space – Equilibrium of a particle in space – Equivalent systems of forces – Principle of transmissibility .
 
UNIT II            EQUILIBRIUM OF RIGID BODIES                                                                               12
Free body diagram – Types of supports –Action and reaction forces –stable equilibrium – Moments and Couples – Moment of a force about a point and about an axis – Vectorial representation of moments and couples – Scalar components of a moment – Varignon’s theorem – Single equivalent force -Equilibrium of Rigid bodies in two dimensions – Equilibrium of Rigid bodies in three dimensions
 
UNIT III           PROPERTIES OF SURFACES AND SOLIDS                                                             12
Centroids   and centre of mass– Centroids of lines and  areas - Rectangular, circular, triangular  areas by integration – T section, I section, - Angle section, Hollow section by using standard formula – Theorems of Pappus - Area moments of inertia of   plane areas – Rectangular, circular, triangular areas by integration – T section, I section, Angle section, Hollow section by using standard formula – Parallel axis theorem and perpendicular axis theorem –Principal moments of inertia of plane areas – Principal axes of inertia-Mass moment of inertia –mass moment of inertia for prismatic, cylindrical and spherical solids from first principle – Relation to area moments of inertia.
 
UNIT IV          DYNAMICS OF PARTICLES                                                                                        12
Displacements, Velocity and acceleration, their relationship – Relative motion – Curvilinear motion - Newton’s laws of motion – Work Energy Equation– Impulse and Momentum – Impact of elastic bodies.
 
UNIT V           FRICTION AND ELEMENTS OF RIGID BODY DYNAMICS                                        12
Friction force – Laws of sliding friction – equilibrium analysis of simple systems with sliding friction – wedge  friction-.  Rolling  resistance  -Translation  and  Rotation  of  Rigid  Bodies  –  Velocity  and acceleration – General Plane motion of simple rigid bodies such as cylinder, disc/wheel and sphere.
TOTAL : 60 PERIODS
OUTCOMES:
<ul>
<li>ability to explain the differential principles applies to solve engineering problems dealing with force, displacement, velocity and acceleration.</li>
<li>ability to analyse the forces in any structures.</li>
<li>ability to solve rigid body subjected to dynamic forces.</li>
</ul>
 
TEXT BOOKS:
<ol>
<li>Beer, F.P and Johnston Jr. E.R., “Vector Mechanics for Engineers (In SI Units): Statics and</li>
</ol>
Dynamics”, 8th Edition, Tata McGraw-Hill Publishing company, New Delhi (2004).
<ol start="2">
<li>Vela Murali, “Engineering Mechanics”, Oxford University Press (2010)</li>
</ol>
 
REFERENCES:
<ol>
<li>Hibbeller, R.C and Ashok Gupta, “Engineering Mechanics: Statics and Dynamics”, 11th Edition, Pearson Education 2010.</li>
<li>Irving  H.  Shames  and  Krishna  Mohana  Rao.  G.,  “Engineering  Mechanics  –  Statics  and</li>
</ol>
Dynamics”, 4th Edition, Pearson Education 2006.
<ol start="3">
<li>Meriam J.L. and Kraige L.G., “ Engineering Mechanics- Statics - Volume 1, Dynamics- Volume</li>
</ol>
2”, Third Edition, John Wiley & Sons,1993.
<ol start="4">
<li>Rajasekaran S and Sankarasubramanian G., “Engineering Mechanics Statics and Dynamics”,</li>
</ol>
3rd Edition, Vikas Publishing House Pvt. Ltd., 2005.
<ol start="5">
<li>Bhavikatti, S.S and Rajashekarappa, K.G., “Engineering Mechanics”, New Age International</li>
</ol>
(P) Limited Publishers, 1998.
<ol start="6">
<li>Kumar, K.L.,  “Engineering  Mechanics”,  3rd   Revised  Edition,  Tata  McGraw-Hill  Publishing company, New Delhi 2008.</li>
</ol>

AERO SEM II Syllabus AERO SYLLABUS GE6253 Engineering Mechanics Syllabus-Semester II-AERO-BE-Anna University

GE6252 Basic Electrical and Electronics Engineering Syllabus-Semester II-AERO-BE-Anna University

ge6252-basic-electrical-and-electronics-engineering-syllabus-semester-ii-aero-be-anna-universityGE6252 Basic Electrical and Electronics Engineering Syllabus-Semester II-AERO-BE-Anna University 
AERO SEM II Syllabus, AERO SYLLABUS

 
 
 
 
 
 
GE6252                 BASIC ELECTRICAL AND ELECTRONICS ENGINEERING                 L  T  P  C
4 0  0   4
OBJECTIVES:
<ul>
<li>To explain the basic theorems used in Electrical circuits and the different components and function of electrical machines.</li>
<li>To explain the fundamentals of semiconductor and applications.</li>
<li>To explain the principles of digital electronics</li>
<li>To impart knowledge of communication.</li>
</ul>
 
UNIT I             ELECTRICAL CIRCUITS & MEASURMENTS                                                             12
Ohm’s Law – Kirchoff’s Laws – Steady State Solution of DC Circuits – Introduction to AC Circuits – Waveforms and RMS Value – Power and Power factor – Single Phase and Three Phase Balanced Circuits.
Operating  Principles  of  Moving  Coil  and  Moving  Iron  Instruments  (Ammeters  and  Voltmeters), Dynamometer type Watt meters and Energy meters.
 
UNIT II            ELECTRICAL MECHANICS                                                                                         12
Construction, Principle of Operation, Basic Equations and Applications of DC Generators, DC Motors, Single Phase Transformer, single phase induction Motor.
 
UNIT III           SEMICONDUCTOR DEVICES AND APPLICATIONS                                                 12
Characteristics of PN Junction Diode – Zener Effect – Zener Diode and its Characteristics – Half wave and Full wave Rectifiers – Voltage Regulation.
Bipolar Junction Transistor – CB, CE, CC Configurations and Characteristics – Elementary Treatment of Small Signal Amplifier.
 
UNIT IV           DIGITAL ELECTRONICS                                                                                           12
Binary Number System – Logic Gates – Boolean Algebra – Half and Full Adders – Flip-Flops – Registers and Counters – A/D and D/A Conversion (single concepts)
 
UNIT V          FUNDAMENTALS OF COMMUNICATION ENGINEERING                                      12
Types of Signals: Analog and Digital Signals – Modulation and Demodulation: Principles of Amplitude and Frequency Modulations.
Communication Systems: Radio, TV, Fax, Microwave, Satellite and Optical Fibre (Block Diagram
Approach only).
 
 
OUTCOMES:
 
TOTAL: 60 PERIODS
 
<ul>
<li>ability to identify the electrical components explain the characteristics of electrical machines.</li>
<li>ability to identify electronics components and use of them to design circuits.</li>
</ul>
 
TEXT BOOKS:
<ol>
<li>Mittle N., “Basic Electrical Engineering”, Tata McGraw Hill Edition, New Delhi, 1990.</li>
<li>Sedha R.S., “Applied Electronics”, S. Chand & Co., 2006.</li>
</ol>
 
REFERENCES:
<ol>
<li>Muthusubramanian R, Salivahanan S and Muraleedharan K A, “Basic Electrical, Electronics and Computer Engineering”, Tata McGraw Hill, Second Edition, 2006.</li>
<li>Nagsarkar T K and Sukhija M S, “Basics of Electrical Engineering”, Oxford press 2005.</li>
<li>Mehta V K, “Principles of Electronics”, S.Chand & Company Ltd, 1994.</li>
<li>Mahmood Nahvi  and  Joseph  A.  Edminister,  “Electric  Circuits”,  Schaum’  Outline  Series, McGraw Hill, 2002.</li>
<li>Premkumar N, “Basic Electrical Engineering”, Anuradha Publishers, 2003.</li>
</ol>

AERO SEM II Syllabus AERO SYLLABUS GE6252 Basic Electrical and Electronics Engineering Syllabus-Semester II-AERO-BE-Anna University

ANNA UNIVERSITY | SYLLABUS | UNIVERSITY QUESTION PAPER | NOTES